|
High-grade coated plywood for use in practically any application
High-grade coated plywood with a robust construction for use in practically any application, 15 birch veneers bonded together and coated both sides with 120 g/m² phenolic resin. Bonding to BFU 100, DIN 68705 T 3.
thickness: 21 mm
size: 1250 x 2500 mm
weight: 14,25 kg/m²
The first size named for the panel information is always the grain direction of the face veneer (principal load-bearing direction).
|
Advantages
|
|
Applications
Walls and slabs, concrete surfaces to high specifications, flat concrete finish
Storage
When storing the units on site, attention should be given to the units being uniformly well protected or equally exposed to the weather. It is only possible to obtain a relatively equal result if the plywood of each unit has acclimatized relatively equally.
Release agents
Only formlining which has been well looked after can ensure a uniform good quality concreting finish. Therefore, PERI recommends using PERI Clean and PERI Bio Clean as release agents. The plywood sheets are thus optimally prepared for their next use. If other release agents are used, the user must check whether the required results can actually be achieved.
More information on PERI release agents can be found in the “Accessories” section.
Edge treatment / Edge sealing
As soon as plywood is cut, attention should be given to the cut edges being immediately sealed again.
|
|
|
References
|
|
Enterprise Drive - Go Transit Bridge, Markham, Ontario
|
|
|
|
