More images 
|
Fast and safe moving process
The SKYTABLE can be used, for example, for the complete width of the building. Requiring only two trusses, the SKYTABLE can be assembled up to a size of 24.4 m x 6.10 m.
The actual SKYTABLE moving procedure offers more safety as site personnel work from the secured slab edges. During the entire moving process, workers do not have to stand on the SKYTABLE itself.
|
Advantages
|
|
Safe moving process
With one crane lift, using a special chain block system, the SKYTABLE is pulled carefully and effortlessly out of the building.Work takes place from secured slab edges. During the entire moving process, workers do not have to stand on the SKYTABLE itself. A particularly important safety factor for site personnel!
Large movable units
Large units of up to 150 m² can be assembled and moved with a single crane lift. In so doing, the SKYTABLE is connected to trusses. The simple pin and cotter pin connection allows a fast assembly process.
Easy lowering of the SKYTABLE
A quick release device is mounted to each MULTIPROP slab prop. Through a simple lever movement, the SKYTABLE can be effortlessly detached from the slab and lowered by approx. 2 cm. After this, the MULTIPROP slab props themselves provide a large lowering range.
Easy adjustment to different floor heights
The table can also be used for larger heights without any changes to the design with the MULTIPROPs used in a tower configuration.
|
|
|
References
|
|
Minto Midtown, Toronto, Ontario
|
|
|
|
