Accuracy, cost-effectiveness and safety: for every climbing formwork system, it is a question of the anchoring system quality.
Therefore, PERI offers officially approved anchoring for all climbing and platform systems - rational in their application along with reliable handling.
The climbing cones M30/DW20 and M36/DW26 were developed especially for single-sided use with SKS/SSC in dam construction and allow the transfer of high tension and shear forces in freshly-poured unreinforced concrete. The corrosion-resistant cones are re-usable - only tie rods and threaded anchor plates remain in the concrete.
The climbing cone M24/DW15 and screw-on cone M24/DW20 have been designed as anchoring for the KG and CB climbing scaffolds.
The screw-on cone M24/DW20 in connection with the threaded anchor plate 20 is used for thin walls.
The climbing cone M24/DW15 in connection with one tie rod DW15 and one threaded anchor plate 15 is used during higher tensile loads from the anchoring.
The anchor sleeve M24 and screw-on cone M24/DW20 are used as anchors for the folding platform FB180-3.
Both the anchor sleeve as well as the screw-on cone M24/DW20 can be used for this purpose in the reinforced slab edge or in the concreted wall.
Advantages
Safe design and application
High quality levels in both workmanship and material
Cost-effective through re-usable screw-on and climbing cones
Optimized anchoring possibilities to suit different applications and loads
